IPA 25
Multi-VCA Dynamics Processor
Classic VCA compression, extended with modern control.
149,00€
Three VCA types.
One Plugin.
Zero Compromise.
IPA 25 delivers the compression behavior you expect from a classic VCA design, then extends it with selectable circuit topologies, intelligent clipping/limiting, visual sidechain control, and modular signal flow.
From mastering-grade VCA precision to tube-style warmth and diode grit, you can switch character instantly without breaking your workflow.
See exactly what’s happening with real-time visuals and get character and control without guesswork.
■ Switch VCA character instantly: Clean, Original, V-Mu, N-Diode
■ Real-time visuals: compression, spectrum, and detector behavior
■ Integrated dynamics toolkit: clipper, limiter, sidechain EQ
■ Zero-latency for tracking / oversampling for mixing
Intro pricing €99 (regular €149) – limited time only.
Listen In Action
The tracks below showcase IPA 25 being used on dry recorded track and against the original hardware.
Drum Bus
Lead Vocal
Electric Guitar Bus
Mix Bus
Every control, exactly where you need it
Move your cursor over the dots
to reveal IPA 25 features
A complete dynamics toolkit in one view.
Built so you can shape tone, punch, and space without breaking focus.
Built so you can shape tone, punch, and space without breaking focus.
Faithful Where It Matters, Extended Where It Counts
IPA 25 captures the exact RMS detection, ratio-dependent knees, and program-dependent release of the original, then extends it with multiple harmonic circuits, sidechain shaping, and integrated peak control.
Instead of locking you into a single circuit, you can choose your harmonic behavior: transparent clean control, tube-like bloom, or diode-style grit. Each one shapes dynamics at the gain-reduction stage, not just distortion pasted on top.
And because mixing today demands more than tone alone, IPA 25 goes beyond what the hardware allowed: a full sidechain EQ, adaptive clipper/limiter, and stereo link shaping, all built in, all CPU-efficient.
You don’t just get the sound you know. You gain the flexibility to shape it on your own terms.
Choose Your Compression Character
With IPA 25, the detector and settings stay constant, what changes is the harmonic fingerprint of the gain-reduction stage.
It’s like having four compressors in one: the same trusted envelope, with circuit-level harmonic differences that change how your mix breathes. Swap between them instantly without upsetting your balance.
- V-Mu: Tube-inspired saturation that blooms in the low-mids and smooths sharp edges.
- IPA 25 (Original VCA): Punchy and precise, with just enough rounding when pushed.
- N-Diode: Asymmetrical clipping that adds grit and brings the midrange forward.
- Clean VCA: Pure envelope control when you need transparency.
Start fast with tailored presets, or dive in and audition characters instantly on your own material.
Compression That Follows The Music
In most compressors, the sidechain is an afterthought. In IPA 25, it becomes a creative tool, letting you decide not just how much compression happens, but why.
- Punch Selector: Original NORM, MID, and LOUD modes, shifting detector focus across the spectrum
- Visual Sidechain EQ: Four flexible bands to draw exactly which frequencies drive gain reduction.
- Stereo Linking: Control how and when channels share reduction: sustained levels, fast transients, or anything in between.
- External Sidechain: Trigger from any source for ducking, pumping, or creative movement.
With IPA 25, the detector follows the music – not the other way around
External sidechain, look-ahead
Kick to Bass Ducking
“The IPA25 takes one of my favorite hardware compressors and turbocharges it with new features and fully adjustable controls. It gives me new possibilities that I didn’t even know that I wanted. The VCA emulations, limiter and clipper features allow me to manipulate sounds in new ways, with incredible detail.”
Ryan Hewitt
Grammy award-winning mixer & engineer | Producer
Red Hot Chili Peppers | Blink 182 | Lumineers | Harry Connick Jr
“Pulsar’s model of this compresor is so extraordinary, with its added feature set, it’s actually way more desirable to use the plugin than the original hardware.”
Craig Bauer
Grammy award-winning mixer & engineer | Producer
Kanye West | Rihanna | Lupe Fiasco | Steve Cole
“I’d been looking for a 2500 style compressor for a while when I came across the IPA 25. It really does a great job glueing a vocal into the mix, and the added flexibilities and graphics are great for really getting that exact sound I was looking for. The versatility is what makes this such a great compressor; it can smash a drum bus, but it’s equally good at cleanly compressing a piano or a nylon string guitar. Definitely my go-to 2500 (or just compressor in general?).”
Vetle Junker
Artist | Producer | Songwriter
Aurora | Sondre Lerche | Metteson
“The Pulsar Audio IPA 25 delivers a faithful emulation of the classic bus compressor while transcending its hardware limitations. It features continuously variable controls for fine-tuning parameters, which offers far greater precision especially for mastering. Combined with an integrated limiter/clipper and multiple harmonic modes, the IPA 25 becomes an exceptionally powerful and versatile compressor. It’s my go-to VCA compressor now!”
Matt Sim
Grammy Nominated Mixer I Mastering Engineer
Travis Scott | Nicki Minaj | The Chainsmokers
Push Level Without Artifacts
IPA 25’s adaptive clipper/limiter adds density only where your mix can mask it – no fuzzy bass, no brickwall flattening.
Limiter – Uses a control-point algorithm that steps in only where overshoots occur. Sustained lows pass untouched, while transient-rich signals gain subtle saturation naturally masked by their spectrum. Each move resets smoothly, avoiding the flat, choked feel of conventional limiting.
Clipper – Trims spikes instantly, adding harmonic weight where it helps and preventing downstream compressors from overreacting.
Routing – Place the module where it fits your workflow:
- Pre-Comp to tame unruly spikes before compression.
- Pre-Mix to add peak control or color inside a parallel path.
- Post-Mix as a maximizer-style ceiling across the bus.
Shape peaks without choking sustain. Raise level without brickwall artifacts.
Punch Or Glue - On Your Terms
Compression isn’t just about how much gain reduction happens, it’s about when. IPA 25’s timing tools let you shape the envelope with intent:
- Lookahead: Anticipates peaks, softening them before they hit for smooth, transparent limiting on dense material.
- Lookbehind: Lets the first transient through untouched, while compressing the sustain for punch and impact.
- Feedforward / Feedback: Choose whether harmonics stay in the audio path or feed into the detector itself, subtly shifting response.
Whether you want punch or glue, IPA 25 gives you the choice.
Faithful Modeling, Without The CPU Tax
IPA 25 is built to slot into real sessions without compromise.
- Tracking: Zero-latency mode keeps performers in the groove.
- Mixing & Mastering: Oversampling for the highest fidelity without aliasing.
- Efficiency: Detailed at the circuit level where it matters, streamlined where it doesn’t, so you get accuracy without burning CPU.
And with real-time visuals showing exactly what’s happening in the audio path, you make critical decisions faster.
FAQ
Is this just another emulation?
No. IPA 25 begins with a faithful model of the original hardware, but goes beyond it with circuit switching, integrated clip/limit, and advanced detector tools.
Will it hit my CPU hard?
No. You can run multiple instances across a large session without spiking CPU – efficient design without shortcuts.
Do the circuits really sound different?
Yes. Each mode introduces its own harmonic fingerprint that changes how transients and mix elements sit in the mix, where you can dial as little or as much of the harmonics using the drive control. Each mode is gain-matched, so you can swap character without rebalancing your mix.
Why include a clipper and limiter inside?
Because peak control isn’t separate from dynamics, it’s part of them. The IPA 25 limiter is intelligent, adaptive, and program-aware.
What makes the sidechain different?
Most plugins give you one filter. IPA 25 gives you Punch modes, a full EQ, stereo linking, and external inputs – so you can shape compression at the source.
Every Pulsar plugin comes with:
- Lifetime license, no subscription required
- Free lifetime updates, no additional fees
- Top-tier customer support
FREE Full-feature 7-day trial
These installers set up the complete plugin version and allow to start a full-featured 7-day trial period.
SYSTEM REQUIREMENTS
DOWNLOADS
SYSTEM REQUIREMENTS
System Requirements
CPU
- Intel Core i3 / i5 / i7 / i9 / Xeon or AMD Quad-Core minimum
Memory
- 4 GB RAM
- 1 GB free disk space
Operating System
- Windows 10 64 bit
- Windows 11 64 bit
GPU
- OpengGL 2.0 compatible GPU
Monitor
- Resolution: minimum 1024x768, recommended 1920x1080
- Refresh rate: 60 Hz
CPU
- Intel Core i3 / i5 / i7 / Xeon / Apple Silicon (M1, M2, M3, M4, M5)
Memory
- 4 GB RAM
- 1 GB free disk space
Operating System
- MacOS 10.11 or later
GPU
- OpengGL 2.0 compatible GPU
Monitor
- Resolution: minimum 1024x768, recommended 1920x1080
- Refresh rate: 60 Hz
Compatible plugin formats
AAX Native
64 bits only
Audio Unit
64 bits only
VST 2.4
64 bits only
VST 3
64 bits only
DOWNLOADS
Downloads
Our software is protected with PACE Anti-Piracy, so you will need an iLok account to use it. On Windows, our installers will automatically install the iLok License Manager on your computer. You can find additional information and support on the PACE iLok website.