Smasher
Original price was: 49€.19€Current price is: 19€.
Straightforward but extreme “British mode” compression – a faithful emulation of a uniquely modified 1176.
All buttons in, all the time
Smasher is an unprecedented custom modification of the classic Urei 1176 compressor circuit, a unique formula that we stumbled upon while fine-tuning other algorithms.
The original 1176 compressor hardware offered a selection of four ratios, but studio engineers soon discovered that pressing them all at once led to a distorted, explosive and highly compressed sound. It’s this “All buttons in” or “British” mode that Smasher was painstakingly designed to recreate.
While remaining very close to the original circuitry, the modifications we’ve built into Smasher will add definition to transients and make your tone more aggressive. We love using it to enhance the ambience in drum busses, but there are many more creative uses too. Smasher won’t work on every single track, but where it does, it works magic.
Smasher excels at raw and gritty sounds, calling to mind bands like Vulfpeck, The Whitefield Brothers and The Black Keys.
Listen for yourself
Why it's unique
Based on an internal feedback configuration, FET compressor designs like the Urei 1176 are known for their super-quick attack times and a colorful tonal response that ranges from soft limiting to heavy saturation.
When running in all-buttons-in mode, several things happen to the 1176’s circuit, including changes to the bias voltages. In Smasher, all these phenomena have been perfectly reproduced for the first time using our proprietary Topology Preservation Technology, bringing the full sonic capability of this classic effect to your DAW.
With our unique tuning and its beautiful, uncomplicated interface, Smasher gives this mythical circuit a new personality.
How does it sound ?
Smasher can add thickness and grit to any drum or bass track, or completely crush a bus, producing an aggressive sound that’s impossible to achieve with other plugins.
On a drum buss
Smasher embues drum mixes with the typical sound of the 1176’s all-buttons-in mode. You get that signature delayed transient squashing and an explosive sound which instantly propels your drums to the front of the mix.
On a snare drum
Add body and sustain to bring out a snare’s tone. Try thickening your snare drum by reaching between -6 and -10dB of gain reduction, then mix a few percent of the resulting huge snare drum sound back into your original dry sound.
On a bass
Since bass often requires a combination of compression and saturation, Smasher is the ideal tool to get it dirty, letting you control precisely how much grit to add. Use the Mix knob to add just a small amount of fuzzy saturation.
On lead vocals
Please don’t try this at home.
Main Features
Topology Preservation Technology
Our proprietary modelling technology guarantees a perfect emulation of the original 1176’s behavior. From the saturation of the magnetic flux in the inductors, to the precise response of the transistors and the tiny calibration effects, everything is perfectly reproduced.
Low CPU consumption
We’ve spent ages optimizing Smasher to consume as few system resources as possible while keeping the same complex sonic results. Smasher takes full advantage of modern CPUs to do more with less, but also allows oversampling at rates up to 384kHz.
Parallel compression
Smasher’s Mix knob lets you blend in the original unprocessed signal. This means that you can really squash the transients with extreme compression, then bring back just a hint of the processed signal to add sustain to a sound without compromising its dynamic qualities.
Linked sidechain
On a stereo bus, channels are usually compressed independently to get smoother control of dynamics… but when you’re compressing audio more brutally, it’s essential to keep the stereo image stable. That’s why Smasher uses a single detector to process a stereo track.
System Requirements
CPU
- Intel Core i3 / i5 / i7 / i9 / Xeon or AMD Quad-Core minimum
Memory
- 4 GB RAM
- 1 GB free disk space
Operating System
- Windows 7 with SP1 64 bit
- Windows 8.1 64 bit
- Windows 10 64 bit
- Windows 11 64 bit
GPU
- OpengGL 2.0 compatible GPU
Monitor
- Resolution: minimum 1024×768, recommended 1920×1080
- Refresh rate: 60 Hz
CPU
- Intel Core i3 / i5 / i7 / Xeon / Apple Silicon (M1,M2)
Memory
- 4 GB RAM
- 1 GB free disk space
Operating System
- MacOS 10.9 and higher
GPU
- OpengGL 2.0 compatible GPU
Monitor
- Resolution: minimum 1024×768, recommended 1920×1080
- Refresh rate: 60 Hz
Compatible plugin formats
AAX Native
Windows: 32/64 bits
Mac: 64 bits only
Audio Unit
64 bits only
VST 2.4
Windows: 32/64 bits
Mac: 64 bits only
VST 3
Windows: 32/64 bits
Mac: 64 bits only
Downloads
Our software is protected with PACE Anti-Piracy, so you will need an iLok account to use it. On Windows, our installers will automatically install the iLok License Manager on your computer. You can find additional information and support on the PACE iLok website.
Main Features
Topology Preservation Technology
Our proprietary modelling technology guarantees a perfect emulation of the original 1176’s behavior. From the saturation of the magnetic flux in the inductors, to the precise response of the transistors and the tiny calibration effects, everything is perfectly reproduced.
Low CPU consumption
We’ve spent ages optimizing Smasher to consume as few system resources as possible while keeping the same complex sonic results. Smasher takes full advantage of modern CPUs to do more with less, but also allows oversampling at rates up to 384kHz.
Parallel compression
Smasher’s Mix knob lets you blend in the original unprocessed signal. This means that you can really squash the transients with extreme compression, then bring back just a hint of the processed signal to add sustain to a sound without compromising its dynamic qualities.
Linked sidechain
On a stereo bus, channels are usually compressed independently to get smoother control of dynamics… but when you’re compressing audio more brutally, it’s essential to keep the stereo image stable. That’s why Smasher uses a single detector to process a stereo track.
Downloads
Our software is protected with PACE Anti-Piracy, so you will need an iLok account to use it. On Windows, our installers will automatically install the iLok License Manager on your computer. You can find additional information and support on the PACE iLok website.
System Requirements
CPU
- Intel Core i3 / i5 / i7 / i9 / Xeon or AMD Quad-Core minimum
Memory
- 4 GB RAM
- 1 GB free disk space
Operating System
- Windows 7 with SP1 64 bit
- Windows 8.1 64 bit
- Windows 10 64 bit
GPU
- OpengGL 2.0 compatible GPU
Monitor
- Resolution: minimum 1024x768, recommended 1920x1080
- Refresh rate: 60 Hz
CPU
- Intel Core i3 / i5 / i7 / Xeon / Apple Silicon (M1)
Memory
- 4 GB RAM
- 1 GB free disk space
Operating System
- 10.10 - 10.15
GPU
- OpengGL 2.0 compatible GPU
Monitor
- Resolution: minimum 1024x768, recommended 1920x1080
- Refresh rate: 60 Hz
Compatible plugin formats
AAX Native
Windows: 32/64 bits
Mac: 64 bits only
Audio Unit
64 bits only
VST 2.4
Windows: 32/64 bits
Mac: 64 bits only
VST 3
Windows: 32/64 bits
Mac: 64 bits only
Juan Sebastian Rodriguez
Recording & Mixing Engineer
Mogwaï | Rhye | Zoé
“Pulsar smasher is a beast! Loud and rude compression. When you need aggression on drums it’s so cool! I love it on toms mono rooms and creative mics. Very great compression!”
John Nathaniel
Producer | Mixing Engineer | Songwriter
Gwen Stefani | OneRepublic | Switchfoot
“Pulsar Smasher is a rockstar when you need to give energy to tracks and have that classic 1176 all buttons in compression style! Adding this on the drum buss and having a bit of the mix knob in can add so much energy!”
FREE Full-feature 14-day Trial
These installers set up the complete plugin version and allow to start a full-featured 14-day trial period.
More plugins
Massive & Mu Bundle
Original price was: 249$.129$Current price is: 129$.
Two high-end secret weapons used by top studio engineers, combining to form the ultimate musical mastering chain.
W495
Original price was: 99$.29$Current price is: 29$.
An accurate emulation of the Neumann w495 3-band EQ.